Jacketed Glass Reactor (EX-Heb-30L)
|FOB Price:||US $2,000-10,000 / Set|
|Min. Order:||1 Set|
|Min. Order||FOB Price|
|1 Set||US $2,000-10,000/ Set|
|Production Capacity:||1000 Sets|
|Payment Terms:||L/C, T/T, Western Union, Paypal|
- Model NO.: EX-Heb-30L
- Transport Package: Plywood Box, Non-Fumigation Wooden Box
- Origin: Xi′an
- Trademark: HEB
- Specification: 30L
- HS Code: 8419899000
HEB series Jacketed glass reactor is used in pharmaceutical and chemicals as well as Research institute, it is requisite tool for distillation and reflux,etc.
Now we can manufacture 1L jacketed glass reactor to max capacity 150L jacketed glass reactor,
From 1L to 10L's jacketed glass reactor, its structure is flat base, the material is 304 stainless steel or 316L or PTFE coated.
From 20L to 150L's Jacketed glass reactor, its structure is "well (#)"Frame, thanks to it is big capacity jacketed vessel, so we need to get steady quietly in the structure, and need bigger power AC motor with frequency converter, no brush, not spark,low noise,good elimination-heating,etc. According to different torque to get reasonable stirring, to reach the best effective of evaporation.
1. It is with standard 304 stainless steel, it can resist acid and alkali.
2. Jacketed vessel is with material high borosilicate glass, can reach to max temperature 300degree, min temperature -80degree(tested by technician), but we need to clarify that we only suggest to use max temperature 250degree, because of it has PTFE valve and PTFE sealing,etc.
3. Bottom Discharging valve: it has two kinds respective for side discharging and non- side discharging valve(straight down discharging), the side discharging valve is easy to connect with other afiliated equipment(for example the another reactor with same function, or getting samples easily,etc); as for non-side discharging valve, it is with same function with side discharging valve, and with 100% PTFE material.
4. Jacketed Vessel, the inner wall is 6mm,the outer wall is 8mm. The active pressure is with 0.2Mpa(about 2KGS),the negative pressure is with -0.098Mpa, the inner wall was connected with outer wall by high temperature,no faulty, no blowhole(our technician needs to do test experiment excluding faulty).
5. Reactor Lid it has standard 5 necks: the middle is the stirring port with flange,the stirring sealing is PTFE sleeve with bearing, and with a mechanical spring tapersleeve, it can be kept in good sealing condition when it is doing stirring reaction. The left is the dropping funnel with 2L(optional:5L dropping funnel),the right is condenser with glass bend with collecting flask 0.25L or 500ml)(Note:20L and 30L's reactor, we can equip 10L or 20L 's collecting flask except of 0.25L or 500ml's glass bend collecting flask; 50L,100L and 150L's reactor, we will equip standard 10L or 20L or bigger 's collecting flask), the rear is multi-function port(air inlet or charging function or outgassing or vaccum supplying).the front is the temperature port with glass thermowell. According to customer request, still we can add a big charging port with 50mm(PTFE cover keeps seal).
6. The motor is no brush,and no spark,low noise,adjustable speed of frequency converter(optional:ex-proof motor). And the controller has speed and temperature's display.
Stirring shaft diameter
The affiliated equipments of jacketed glass reactor, it has cooling circulation system and heating circulation system:
It has some points:
Cooling circulation system, some users could need low temperature when it is stirring reaction, it is necessary for connecting with this equipment.
Heating circulation system, officially, our user must provide heating for our stirring reaction, so we will recommend the capacity of heating circulation bath following: CYY-5 Heating circulation system equips 1L-5L's jacketed glass reactor, CYY-10 only equips 10L's reactor, CYY-20 equips 20L reactor, CYY-30 equip 30L's reactor, CYY-50 equips 50L's reactor,CYY-100 equips 100L's reactor or 150L's reactor.