| After-sales Service: | Yes(Except The Consumbles) |
|---|---|
| Warranty: | 1 Year |
| Type: | Reaction Kettle |
| Material: | Glass-Lined |
| Capacity: | <50L |
| Structure: | Single Layer |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 20L Single layer glass reactor 
Product introduction:
This equipment is composed of electric constant speed stirring system, condensation, dropping system and heating bath. While stirring the materials, the bath heats the materials in the kettle. The evaporation efficiency can be increased under vacuum conditions ( a vacuum device need to be connected). The solvent vapor is cooled into liquid when passing through the glass condensing coil (a cooling device need to be connected), which can be refluxed into the kettle. It can also be recycled in collection flask.
This series of products need to be equipped with a vacuum device, a cooling circulating device, etc. to form a system devices.
Basic configuration:
• The parts in contact with the material are all made of high borosilicate glass (expansion coefficient 3.3) and PTFE materials, which have stable performance and are not easy to react with the materials.
• The main stent is made of cold plate anti-corrosive spray + aluminum alloy. And the bath is made of stainless steel.
• Glass + PTFE material discharging valve, side material discharge without effusion.
• Low-speed power-increasing motor, electronic stepless speed regulation, fine adjustment through knobs, speed adjustment box with dual display digitally displaying speed and material temperature in the kettle.
• Thermostatic bath with temperature digital display, switch controlling by knob with lock, K-type sensor + stainless steel probe at bottom of bath.
• The stirring system uses ceramic bearings and mechanical seal to prevent the stirring rod from wearing out.
• Using PT100 temperature sensor, 304 stainless steel material, wrapped in transparent PTFE tube , double anti-corrosion.
• Vacuum pressure gauge shows real-time vacuum indicated by pointer.
• Crescent-type stirring paddle, 304 stainless steel + PTFE stirring blade; the material of the stirring rod is 304 stainless steel, and it is wrapped in PTFE tube outside.
• There is a water discharging valve at the bottom of the bath to facilitate liquid discharge.
• There is a universal wheel with brake at the bottom of the equipment, which can be moved as a whole and be operated conveniently.
• Stirring, heating two fuses safety protection.
Technical parameter:
| Model | HB-20L | |
| Reactor volume | 20L spherical shape | |
| Voltage/Frequency | 220V 50Hz/110V 60Hz | |
| Stirring motor power | 90W1/3 | |
| Heating power | 5KW | |
| Stirring speed | 0-450rpm/min | |
| Temperature range of reactor | -80ºC~ +250ºC | |
| Temperature measuring accuracy | ±1ºC | |
| Vacuum | 0.098Mpa | |
Kettle body Φ355mm 7 ports |
Stirring port | Φ80mm flange port |
| Condensation reflux port | 50# ball mill port | |
| Port of constant pressure funnel | 34# standard port | |
| Pressure relief port | 34# standard port | |
| Temperature measuring port | Φ45 flange port | |
| Solid feeding port | Φ125mm flange port supporting PTFE cap | |
| Bottom discharging port | Φ80mm flange port | |
| Stirring paddle | Φ17×650H(mm) blade 190mm | |
| Condenser dimension | Φ100*600H(mm) lower Φ60 flange port | |
| Condensing area | 0.4m2 | |
| Dean-stark | Upper Φ60 flange port; left 50# ball mill stopper | |
| Volume of constant pressure funnel | 1L, upper 29# standard port with glass stopper; lower 34#standard stopper | |
| Pressure relief valve | 34# standard plug valve; air outlet(pagoda joint)with 12mm outer diameter | |
| Material discharging valve | Φ80 flange port; Φ33mm material discharging hole; oblique discharging port(pagoda joint)Φ34mm; 350mm from the ground | |
| Vacuum nozzle | Pagoda joint with 12mm outer diameter | |
| In and out circulating nozzle of condenser coil | Pagoda joint with 15mm outer diameter | |
| Bath dimension | Φ450×260H(mm) | |
| Overall dimension(W*D*H) | 810×540×1960mm | |
| Net weight | 48KG | |
| Packing dimension | 1200×740×920mm wooden package 0.82m³ | |
| Packing weight | 93KG | |
Pakage&Delivery:
Factory:
Certification:
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}