| Customization: | Available |
|---|---|
| After-sales Service: | Yes(Except The Consumbles) |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
10L Ex-proof jacketed glass reactor ex-proof double layer glass reactor
Product introduction:
This machine has electric constant speed stirring system, condensation and dropping system. The interlayer of kettle body needs to be connected with heating or cooling circulation equipment. When the material is stirred, the circulating hot solution or cooling liquid is injected through the interlayer to make the materials in the kettle are heated or cooled at a constant temperature. When the material is heated and reacted, the evaporation efficiency can be improved under vacuum conditions (a vacuum device need to be connected). The solvent vapor is cooled into liquid when passing through the glass condensing coil (a cooling device need to be connected), which can be refluxed into the kettle. It can also be recycled through the lower valve of the dean-stark. When the reaction is completed, the material can be discharged from the side outlet at the bottom of the kettle.
This series of products need to be equipped with a vacuum device, a high-temperature or low-temperature circulation device to form system devices.
Basic configuration:
• The parts in contact with the material are all made of high borosilicate glass (expansion coefficient 3.3) and PTFE materials, which have stable performance and are not easy to react with the materials.
• Using aluminum alloy + stainless steel material as base plate body.
• Glass + PTFE discharge valve, side material discharge without effusion.
• Frequency conversion speed regulation, explosion-proof switch, fine adjustment via knob, explosion-proof box with dual display function digital displays speed and temperature of materials in the kettle.
• The stirring system adopts ceramic bearings and mechanical seal to prevent abrasion of the stirring rod.
• Using PT100 temperature sensor, 304 stainless steel material, wrapped by transparent PTFE tube outside, double anti-corrosion.
• Vacuum pressure gauge displays real-time vacuum by pointer.
• Crescent-type stirring paddle, 304 stainless steel + PTFE stirring blade; the material of the stirring rod is 304 stainless steel, and it is wrapped in PTFE tube.
• There is a universal wheel with brake at the bottom of the machine, which can be moved as a whole and be operated conveniently.
• Fuse safety protection.
• Explosion-proof motor, explosion-proof aluminum shell of frequency converter, explosion-proof tube with cable.
Technical parameter:
| Model | EXS212-10L | |
| Reactor volume | 10L, inner diameter 230mm, outer diameter 290mm, inner lenht 354mm | |
| Interlayer volume | About 8L | |
| Voltage/Frequency | 220V 50Hz/110V 60Hz | |
| Stirring motor power | EX180W | |
| Stirring speed | 0-1400rpm/min | |
| Temperature range of reactor | -80ºC~ +250ºC | |
| Temperature measuring accuracy | ±1ºC | |
| Vacuum | 0.098Mpa | |
Kettle cover Φ265mm 6 ports |
Stirring port | Φ50mm flange port |
| Condensation reflux port | 50# ball mill port | |
| Port of constant pressure funnel | 40# standard port | |
| Pressure relief port | 34# standard port | |
| Temperature measuring port | Φ45mm flange port | |
| Solid feeding port | Φ80mm flange port, inner diameter Φ60mm, matching PTFE cover | |
| Stirring paddle | Φ17×700H(mm) blade 150mm | |
| Condenser | Φ100mm×600H(mm) lower Φ60mm flange port | |
| Condensing area | 0.4m2 | |
| Dean-stark | Upper Φ60 flange port, left 50# ball mill stopper, lower 1L spherical flask with glass discharginig valve | |
| Constant pressure funnel | 1L, upper 29# standard port with glass stopper, lower 40#standard stopper | |
| Pressure relief valve | 34# standard plug valve, air outlet (pagoda joint) with 12mm outer diameter | |
| Inlet and outlet circulation port of interlayer | Φ45 flange port supporting flange plate, 1/2" male-PNT adapter | |
| Material discharging port | Φ75mm flange, Φ33mm material discharging hole, oblique discharge port (pagoda joint) Φ34mm; 350mm from the ground | |
| Vacuum nozzle | Pagoda joint with 12mm outer diameter | |
| In and out circulating nozzle of condenser coil | Pagoda joint with 15mm outer diameter | |
| Overall dimension(W*D*H) | 780×550×1870mm | |
| Net weight | 53KG | |
| Packing dimension | 1390×530×810mm wooden package 0.60m³ | |
| Packing weight | 87KG | |
Pakage&Delivery:
Factory:
Certification:
){kind=link}