| Customization: | Available |
|---|---|
| After-sales Service: | Yes(Except The Consumbles) |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
2L single layer glass reactor
Product introduction:
This equipment is composed of electric constant speed stirring system, condensation, dropping system and heating bath. While stirring the materials, the bath heats the materials in the kettle. The evaporation efficiency can be increased under vacuum conditions ( a vacuum device need to be connected). The solvent vapor is cooled into liquid when passing through the glass condensing coil (a cooling device need to be connected), which can be refluxed into the kettle. It can also be recycled in collection flask.
This series of products need to be equipped with a vacuum device, a cooling circulating device, etc. to form a system devices.
Basic configuration:
• The parts in contact with the material are all made of high borosilicate glass (expansion coefficient 3.3) and PTFE materials, which have stable performance and are not easy to react with the materials.
• The main stent is made of cold plate anti-corrosive spray + aluminum alloy. And the bath is made of stainless steel.
• ON-OFF tilt switch to control stirring and heating.
• Electronic stepless speed regulation, fine-adjustment through knobs, speed box digital displaying speed.
• Constant temperature bath with temperature digital display, K-type sensor at bottom of bath + stainless steel probe.
• The stirring system uses ceramic bearings and mechanical seal to prevent the stirring rod from wearing out.
• Vacuum pressure gauge shows real-time vacuum indicated by pointer.
• Crescent-type stirring paddle, 304 stainless steel + PTFE stirring blade. The material of the stirring rod is 304 stainless steel, and it is wrapped in PTFE tube outside.
• Stirring, heating two fuses safety protection.
Technical parameter:
| Model | HB-2L | |
| Reactor volume | 2L spherical | |
| Voltage/Frequency | 220V 50HZ/110V 60Hz | |
| Stirring motor power | 40W | |
| Heating power | 1.5KW | |
| Stirring speed | 0-800rpm/min | |
| Reactor temperature range | -80ºC~ +250ºC | |
| Temperature measuring accuracy | ±1ºC | |
| Vacuum | 0.098Mpa | |
Kettle body Φ166mm 5 ports |
Stirring port | Φ50mm flange port |
| Condensation reflux port | 24# standard port | |
| Port of constant pressure funnel | 24# standard port | |
| Pressure relief port | 19# standard port | |
| Temperature measuring port | 19# standard port | |
| Stirring paddle | Φ10×400H(mm) blade 80mm | |
| Condenser | Φ40mm×350H(mm), upper 24#standard port, lower 24#standard stopper | |
| Constant pressure funnel | 250ml, upper 24#standard port with glass stopper, lower 24#standard stopper | |
| Pressure relief valve | 19#Standard plug valve, air outlet (pagoda joint) with 10mm outer diameter | |
| Temperature measuring port | 19#standard stopper with glass temperature measuring tube | |
| Collection device | Two adapters, 24# standard port 500 spherical collection flask | |
| Vacuum nozzle | 24#Glass nozzle (pagoda joint) with 10mm outer diameter | |
| In and out circulating nozzle of condenser coil | Pagoda joint with 10mm outer diameter | |
| Bath dimension | Φ245×140H(mm) | |
| Overall dimension(W*D*H) | (400-700)×330×930mm | |
| Net weight | 18KG | |
| Packing dimension | 1000×460×510mm wooden package 0.23m³ | |
| Packing weight | 33KG | |
Pakage&Delivery:
Factory:
Certification:
){kind=link}