100L Industrial Vacuum Rotary Evaporator

• After-sales Service: Yes(Except The Consumbles)
• Warranty: 1 Year
• Power Supply: 380V 50Hz
• Vacuum: 0.095MPa
• Rotary Flask Volume: 100L
• Collecting Flask Volume: 50L
• Model NO.: RE-100L
• Rotary Speed: 0-120rpm/Min
• Temperature Control Range: Room Temperature-180 Degree
• Overall Dimension(W*D*H): 1700*850*2600mm
• Net Weight: 270kg
• Transport Package: Wooden Box
• Specification: ISO9001: 2000
• Trademark: HEB
• Origin: Xi′an
• Production Capacity: 50/Month

Product Description

                           100L Laboratory Large Size Rotary Vacuum Evaporator

Product Description

 

• The parts in contact with the material are all made of high borosilicate glass (expansion coefficient 3.3) and PTFE materials, which have stable performance and are not easy to react with the materials.
• The stent is made of cold plate anti-corrosive spray+ aluminum alloy material, and the bath is made of 304 stainless steel.
• The sealing system uses PTFE + fluororubber + skeleton oil sealing compound sealing
• Oily vacuum pressure gauge shows real-time vacuum by pointer.
• The piston-type feeding valve is sleeved with PTFE extension tube, which can be continuously fed to the evaporation bottle under vacuum status.
• Upright three-layer serpentine coil as condenser, main condenser+auxiliary condenser double condensers.
• Large LCD screen, which can control rotation, heating and lifting at the same time.
• Using brushless deceleration booster motor as rotary motor, no spark and low noise.
Lifting motor also uses deceleration booster motor.
• Thermostat controlled bath, with PT100 sensor + stainless steel probe at the bottom of bath.
• Bath is lifted electrically
• Rotating and heating double fuses safety protection
• The collection flask has a lower discharging port, equipped with glass + PTFE independent discharge valve.
• There is a water discharging valve at the bottom of the bath to facilitate liquid discharge.
• Vacuum switching valve can continuously collect and discharge materials without affecting the system vacuum and solution distillation
• Over-temperature protection function, when the actual temperature> setting temperature+5 ºC, the machine will automatically power off.
• Anti-drying function, when the water level in the heating bath is lower than the heating tube, the machine will automatically power off.
• If the power is suddenly cut off while the machine is working, the machine will automatically stop heating when the power is turned on again
 

Product Parameters

 

Model	RE-100L
Voltage/Frequency	380V/50HZ
Total Power	15160W
Rotary motor power	120W1/5
Lifting motor power	40W1/12.5
Heating power	15KW
Vacuum	0.095Mpa
Rotary flask volume	100LΦ610mm/Φ180 flange port
Collecting flask volume	50LΦ470mm/upper Φ80 flange port×Φ35 flange port×2pcs×lower Φ80 flange port
Rotary speed	0-120rpm/min
Temperature control range	Room temperature-180ºC
Temperature control accuracy	±1ºC
Bath lifting stroke	215mm
Condenser dimension	Main condenser Φ230×950H(mm), upper Φ80 flange port, lower Φ263 flange port Auxiliary condenser Φ230×530H(mm), upper Φ263 flange port, lower Φ80 flange port, side Φ100 flange port
Condensing area	2.3(1.5+0.8)m2
Gas cylinder	Left Φ45 flange port, side Φ100 flange port, right Φ100 flange port
Material feeding valve	Φ45 flange port, glass+PTFE valve, feeding valve (pagoda joint) with 16mm outer diameter
Multi-function port	Φ35 flange port, glass+PTFE valve, glass nozzle (pagoda joint) with 12mm outer diameter
Releasing valve	Φ35 flange port×2pcs, glass+PTFE valve, releasing nozzle(pagoda joint)with 12mm outer diameter
Material discharging valve	Φ80 flange port, side discharging valve (pagoda joint)with 20mm outer diameter, 260mm from the ground
Vacuum nozzle	Φ80 flange port, nozzle(pagoda joint)with 16mm outer diameter
In and out circulating nozzle of condenser coil	Pagoda joint with 16mm outer diameter
Bath dimension/weight	Φ700×400H(mm) about 153L
Overall dimension(W*D*H)	1700×850×2600mm
Net weight	270KG
Packing dimension	1670×860×1570mm wooden package 2.25m³
Packing weight	366KG

 

Company Profile

 

Certification:

Packaging & Shipping

 

FAQ

1. Are you the factory?
 
Yes, we're.
Established in 2008, we manufacture rotary evaporator,  jacketed glass reactor, chiller etc.
 
2. What is the delivery time?
 
Generally speaking, the delivery time is 7-10 days for regular products. For the customized instrument, about 10~20 days is needed. 
 
3. What's the warranty period? How do you provide this?
 
One year (12 months).
We have very strict inspection and testing to make sure the instruments which you received are high-quality and reliable.
If there's any problem, we'll provide you the on line solution in 12 hours. If the problem is caused by accessory, we'll provide you the spare parts for free. If the problem is caused by the instrument quality, and cannot be repaired, we'll ship you the new one.